news information

FUXIN RUIFENG FLUORINE CHEMICALS CO., LTD

Construction Technology of Fluorocarbon Paint

Fluorocarbon paint construction procedures are different, different stages of fluorocarbon paint construction process is also different. General buildings are cement structure. Cement has CaO, strong alkaline will occur carbonation chlorination, thus destroying the wall. General cement structure curing maturity period is 26d. 26d after strong structure, low alkaline, water content decreased. The high pH value of cement is absolutely not neutralized by acid, which is a man-made destruction of cement and will aggravate the flooding of salt-alkali. The second is to do a good job of waterproof treatment. Water seepage is the root cause of the problem of architectural coatings. Regarding the substrate treatment, we measured the following data and recorded: pH<10, water content

10

2017

/

03

Causes of surface sagging during construction

The problem of sagging on the surface is because the construction viscosity is low, the one-time spraying is too thick, and the solvent content of high boiling point is too much. Treatment method: adjust the amount of diluent, reduce the thickness of a spray or reduce the amount of oil out of the spray gun.

10

2017

/

03

Cracking problem of metal fluorocarbon paint, fluorocarbon resin

Whether it is metal fluorocarbon resin, solid color fluorocarbon resin, exterior fluorocarbon resin and special effects of fluorocarbon resin, itself will not crack the problem, the majority of cracking is the fluorocarbon resin putty layer before spraying, qualified fluorocarbon resin will not appear any cracking phenomenon. Secondly, the construction of fluorocarbon resin is very important, the correct construction of fluorocarbon resin can ensure excellent durability, protection, decoration and other excellent performance of fluorocarbon resin, the correct construction of fluorocarbon resin can make the metal fluorocarbon resin coating long-term perfect as new, reduce maintenance requirements. Therefore, the following matters should be paid attention to when spraying fluorocarbon resin: 1. Each

10

2017

/

03

Paint color scheme, fluorocarbon resin

Light colors on a white background are the safest. People who are tired of "one white to the end" do not want to be disturbed by too colorful colors. White plus other light colors is the most coordinated color matching method. The matching of white and light colors is not too limited, and can be matched in a large area in a space. The transition of the same color has layers. If you want to be surrounded by colors, you don't want to be too monotonous and depressed. Gradual progress and transition can bring more changes and levels to the space without losing the expressive force of style. Pure white bright color personality style delicate and charming powder, bright red, bright green, elegant purple, each of which is so full of personality, with pure white to balance can achieve coordination, and full of style. Cold and warm

16

2017

/

02

< 12 >

Contact number for fluorocarbon resin and fluorinated acrylic ester: 0418-8185581 (Manager Wu)
Contact number for functional fluorinated

monomers and fluorinated fine chemicals:

15042591360(Manager Feng)
Telephone：0418-8185581
Fax: 86-0418-3359863

Address: Fluorine Industry Development Zone,

Fuxin City, Liaoning Province

Website

Copyright @ Fuxin Ruifeng Fluorochemical Co., Ltd  Power by 300.cn shenyang SEO Licence